---
title: Read Point
slug: jetstream-v2/read-point
docTags:
createdAt: 2024-01-22T14:54:12.376Z
---
## About
Read points are powerful RFID sensors that can be mounted almost anywhere to track RFID tags passing through the sensors range. The most common configurations include doorway-mounted portals that track the movement of tags in and out of the room, and ceiling or wall-mounted portals that track the sighting of tags in a particular location.
Model: TS090
::Image[]{src="https://api.archbee.com/api/optimize/_ugIDHUFtIMLpunh0Oumr/5Gs352afI1WY1E9evGYqH_image.png" size="46" width="883" height="382" position="center" showCaption="false"}
## Commands
| **Name** | **Supported** |
| ----------------------------------------------------------------------- | ------------- |
| [Update Firmware](docId\:h9h679y-t3yZTCIPN2gCZ) | Yes |
| [Get All Passes](docId\:D7J1rXbGYEhBv3BaJwGSP) | No |
| [Add or Remove Passes](docId\:thE3S6MtW3BaEAuUL1A83) | No |
| [Get All RFID Tags](docId\:Ci32mN8hWOSBCMjMdu4tP) | No |
| [Restart a Device](docId:9JCOwNFUdipBZNNnRyfR0) | Yes |
| [Lock a Device](docId\:WaHzV_Ft98lWRPl3x2p0V) | No |
| [Unlock a Device's Door](docId\:qDtEwzYTI-4VMdsnli9Qm) | No |
| [Get a Device's Configuration Parameters](docId:_94Vzb6djZTjxFYzb78UJ) | Yes |
| [Set a Device's Configuration Parameters](docId\:lLqub1KfYHmEOmOHN_1Fc) | Yes |
## ConfigParameters
| **Name** | **Description** | **Data Type** | **Min** | **Max** | **Default** |
| ----------------------------- | -------------------------------------------------------------------------------------------------------------------------- | ------------- | ------- | ------- | ---------------------------------------------------------------------------------------------------- |
| **Name** | **Description** | **Data Type** | **Min** | **Max** | **Default** |
| AntennaTxPower | The dB transmit power of all of the antennas. | Int | 15 | 32 | 23 |
| AntennaRxSensitivity | The dB receive sensitivity of all of the antennas. | Int | -80 | -30 | -70 |
| AutoUpdate | Firmware auto update enable. | Bool | 0 | 1 | 0 |
| CaptureTime | Time in seconds before a tag that enters the field is reported. | Int | 1 | 120 | 5 |
| CommandPollInterval | The number of minutes between polling for device commands in Jetstream. | Int | 0 | 600 | 60 |
| CommsReboot | Number of minutes after the system loses communication that it will automatically reboot. | Int | 10 | 1440 | 230 |
| CommsReconnectInterval | Time in seconds to wait before attempting to communicate with Jetstream if there were any communication problems. | Int | 1 | 300 | 10 |
| CommsTimeout | Time in seconds to wait for a reply from Jetstream after sending an event or command response. | Int | 1 | 300 | 60 |
| HeartbeatEventInterval | The number of minutes between sending a HeartbeatEvent. A setting of 0 will disable HeartbeatEvents. | Int | 0 | 600 | 60 |
| InactivityInterval | Time in seconds communications will wait before re-establishing a connection if there is no activity. | Int | 0 | 3600 | 300 |
| JetstreamDeviceUrl | The URL to which the read point sends Jetstream messages. | String | - | - | [http://us-device.tersosolutions.com/](http://us-device.tersosolutions.com/) |
| JetstreamWebsocketAppEndpoint | The Jetstream resource used to connect for WebSocket communications. Using '#' will disable WebSocket communications. | String | - | - | /dwsliveconnection.ashx |
| LogEntryLevel | The verbosity of the logs sent by the reader
* Off
* Error
* Warning
* Information
* Verbose | String | - | - | Error |
| LogFileLevel | The verbosity of the logs saved locally on the reader
* Off
* Error
* Warning
* Information
* Verbose
* Trace
* Debug | String | - | - | Debug |
| NumAntennas | Number of antennas active for reader. | Int | 1 | 4 | 1 |
| ObjectEventHour | The hour to perform the daily system scan as well as other system checks. A value of -1 disables this feature. | Int | -1 | 23 | 0 |
| ReaderLogEntryOnFailure | Generate a LogEntryEvent when communications to the internal RFID reader fails. | Bool | 0 | 1 | 0 |
| RemoveEvent | Sets whether an aggregate event "remove" is sent when a tag leaves the field of scanning. | Bool | 0 | 1 | 0 |
| SecureSocket | Use secure communications over HTTPS for the read point. | Bool | 0 | 1 | 1 |
| VersionsFileUrl | Location of file listing current versions of firmware. Used to configure auto firmware update. | String | - | - | [http://firmware.tersosolutions.com/versions.json](http://firmware.tersosolutions.com/versions.json) |
## LogEntryEvents
The list below are some common, potential LogEntryEvents a read point may send in. However, not all possible LogEntryEvents are listed in this table. The LogEntryLevel in use determines which LogEntryEvents are sent to Jetstream.
| **Name** | **Description** |
| ------------------------ | ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- |
| LowFlashMemory | LowFlashMemory occurs when the read point has less than 25% flash memory. |
| LowMemory | LowMemory occurs when the read point has less than 25% memory. This event will be sent every hour until the device reboots. Reboot occurs automatically if memory drops to 10%. |
| NewFirmwareDownloadError | NewFirmwareDownloadError occurs when a request to upgrade firmware fails. |
| ReadException | ReadException occurs when there is an issue performing an RFID scan. |
| Startup | Startup occurs whenever the read point is started up. |
## SensorReadingEvents
The Read Point does not generate any SensorReadingEvents.