Security Cabinets
About
Security cabinets are Jetstream-enabled cabinets that enable access control and logging, alerting, and the ability to remotely lockdown. They do not possess RFID reading or Temperature sensing capabilities like RFID Enclosures. To learn more, visit: https://www.tersosolutions.com/products/large-secured-access-cabinet/.
Model: TS092
Commands
ConfigParameters
| Name | Description | Type | Min | Max | Default |
| ACLockdownOnPowerFailure | Lockdown unit if AC power fails | bool | 0 | 1 | 0 |
| ACLogentryOnPowerFailure | Send a logentry alarm if AC power fails | bool | 0 | 1 | 1 |
| AggregateEventScanCount | Number of times to scan after product is added/removed and door is closed | int | 1 | 100 | 2 |
| AutoUpdate | Enable the automatic update of firmware | bool | 0 | 1 | 0 |
| BatteryThreshold | Send logentry alarm when backup battery falls below this level | string | 0 | 30 | 23 |
| CommandPollInterval | The number of minutes between polling for device commands in Jetstream. | int | 0 | 600 | 60 |
| CommsReboot | Number of minutes after the system loses communication that it will automatically reboot | int | 10 | 1440 | 230 |
| CommsReconnectInterval | Time in seconds to wait before attempting to reconnect with Jetstream if there were any communication problems. | int | 1 | 300 | 10 |
| CommsTimeout | Time in seconds to wait for a reply from Jetstream after sending an event or command response | int | 1 | 300 | 60 |
| DNS | The DNS to be used in a static LAN environment. When set to '0.0.0.0', the DHCP assigned DNS server is used instead. | IP address | 0.0.0.0 | ||
| DoorOpenTimeLimit | Time in seconds that the door can be left open before a DoorOpen alarm is sent | int | 1 | 43200 | 300 |
| DoorUnlockTimeLimit | After a valid pass unlocks door, it stays unlocked for this long (seconds) | int | 1 | 3600 | 10 |
| Gateway | The gateway address to be used in a static LAN environment. When set to '0.0.0.0', the DHCP assigned Gateway address is used instead | IP address | 0.0.0.0 | ||
| HeartbeatEventInterval | The number of minutes between sending a HeartbeatEvent. | int | 0 | 600 | 60 |
| InactivityInterval | Time in seconds communications will wait before re-establishing a connection if there is no activity. | int | 70 | 3600 | 300 |
| IP | The IP address to be used in a static LAN environment. When set to '0.0.0.0', the DHCP assigned IP address is used instead. | IP address | 0.0.0.0 | ||
| JetstreamDeviceUrl | The URL to which the enclosure sends Jetstream messages. | string | us-device.tersosolutions.com | ||
| JetstreamVersion | Verson of Jetstream that the events will be available after DWS receives them "3" - sends to v3 endpoints as v3 JSON events "2" - send to v2 endpoints as v2 JSON events "1.5" - sends to v1.5 endpoints as XML events | string | 1.5 | ||
| JetstreamWebsocketAppEndpoint | The Jetstream resource used to connect for WebSocket communications. Using '#' will disable WebSocket communications. | string | /dwsliveconnection.ashx | ||
| LocationService | Report location of device (currently not supported on this device) | bool | 0 | 1 | 0 |
| LogEntryLevel | The verbosity of the logs sent by the enclosure - Off - Error - Warning - Information - Verbose | string | Error | ||
| LogFileLevel | The verbosity of the logs saved locally on the enclosure - Off - Error - Warning - Information - Verbose - Trace - Debug | string | Off | ||
| ObjectEventHour | The hour to perform the daily system scan as well as other system checks. Set to -1 to turn off | int | -1 | 23 | 0 |
| ObjectEventScanCount | The number of times to scan during a GetEPCListCommand or during the daily system scan. | int | 1 | 100 | 2 |
| Ping Interval | For sending websocket png to server. | int | 0 | 3600 | 0 |
| SecureSocket | Use secure communications over HTTPS for the enclosure. | bool | 0 | 1 | 1 |
| SensorReadingEventInterval | Minutes between reporting temperature sensor data. Set to 0 to turn off temperature readings | int | 0 | 600 | 60 |
| Subnet | The subnet address to be used in a static LAN environment. When set to '0.0.0.0', the DHCP assigned subnet is used instead. | IP address | 0.0.0.0 |
LogEntryEvents
| Name | Description |
|---|---|
| ACPowerFailure | ACPowerFailure occurs when the enclosure loses AC power and is running on battery backup. |
| ACPowerRestore | ACPowerRestore occurs when the enclosure has AC power restored. |
| DoorBreach | DoorBreach occurs when the door lock is released by something other than the enclosure. For example, someone prying the door open would cause this LogEntryEvent to be generated. |
| DoorOpen | DoorOpen occurs when the door is left open for greater than the DoorOpenTimeLimit. |
| DoorOpenRestore | DoorOpenRestore occurs when the enclosure's door is closed after a DoorOpen scenario. |
| DoorSensorFailure | DoorSensorFailure occurs when the enclosure believes there is a problem with the door sensor. |
| LowBattery | LowBattery occurs when the enclosure's internal UPS battery voltage is less than the BatteryThreshold. |
| LowFlashSpace | LowFlashSpace occurs when the enclosure has less than 25% flash memory. |
| LowMemory | LowMemory occurs when the enclosure has less than 25% memory. This event will be sent every hour until the device reboots. Reboot occurs automatically if memory drops to 10%. |
| NewFirmwareDownloadError | NewFirmwareDownloadError occurs when a request to upgrade firmware fails. |
| Shutdown | Shutdown occurs whenever the enclosure is powered down. |
| Startup | Startup occurs whenever the enclosure is started up. |
| UserPassReaderFailure | UserPassReaderFailure occurs when the enclosure loses its connection to the pass reader. |
| UserPassReaderRestore | UserPassReaderRestore occurs when the enclosure has restored a connection to the pass reader. |
SensorReadingEvents
Secured Cabinets do not generate any SensorReadingEvents.