Please make sure the unit has not been accessed or opened for 5 to 10 minutes when shutting down the unit

1.)           Power off the cabinet with the main power switch on the back of the cabinet.

2.)           Press in the Reset button and hold (Pin hole on the back of the cabinet) for about 5 seconds. Please hit the button only once.

3.)    To verify the reset has been completed, the LCD Screen which normally reads "Welcome, Place Pass Below" should be dark after pressing the reset button. If the screen is still lit up, the reset did not work and the button will need to be pressed again.

4.)    Power on the cabinet with the main power switch in the back. (see picture above)

5.)   Following the completion of the reset process, please allow 3-5 minutes for the device for the device to boot up before presenting a pass.