Reset Instructions
TS079 Reset Instructions
2min
please make sure the unit has not been accessed or opened for 5 to 10 minutes when resetting 1 ) check all cable connections 2 ) power off the freezer with the main power switch on the right side on the back of the enclosure the unit might audibly alarm, this is normal 3 ) press in the reset button (pin hole next to horseshoe sticker on the right of the enclosure) for about 5 seconds there are two pictures of this button below restart instructions 1 ) power on the freezer with the main power switch (used in step 1) in the back 2 ) the lcd screen which normally indicates “welcome, place pass below” will turn back on and go through a sequence of messages “please wait, system booting” “please wait, system scanning” “welcome, place pass below” 3 ) following the completion of the reset process, please allow 3 5 minutes for the device for the device to boot up before presenting a pass 4 ) once the device has returned to “welcome, place pass below” on the screen, it should be back in working order